AirHome

Wireless Plug in Thermostat, Digital Thermostat Outlet LCD Display Temperature Controller with Heating and Cooling Mode for Portable Heater, Wall Panel Heater, Window AC, and More

Wireless Plug in Thermostat Review

If you are looking for a simple and convenient way to control the temperature of your heating or cooling appliances, you might want to consider the Nashone Wireless Plug in Thermostat. This device is a plug and play type, which means you don’t need to install or wire anything. You just plug your appliance into the thermostat outlet, and use the remote control to set your desired temperature. The thermostat will automatically turn on or off the appliance according to the current and target temperature. This can help you save energy and maintain a comfortable room temperature.

In this article, we will review the features, benefits, and drawbacks of the Nashone Wireless Plug in Thermostat, and give you our honest opinion on whether it is worth buying or not. We will also answer some common questions that you might have about this product. Let’s get started!

Features of the Nashone Wireless Plug in Thermostat

The Nashone Wireless Plug in Thermostat consists of two components: a remote control unit with an integrated temperature sensor, and an outlet unit that connects to your appliance. The remote control unit can be mounted on the wall or placed on a table, and it has a LCD display with green backlight that shows the current and target temperature. The outlet unit has a 3-prong socket with a grounded terminal, and it can handle a maximum load of 110V/15A/60Hz, or 1800W. The outlet unit also has a LED indicator that shows the working status of the appliance.

The main features of the Nashone Wireless Plug in Thermostat are:

  • Plug and play type, no installation required
  • Support heating or cooling mode
  • LCD display with green backlight
  • ℃/℉ switchable
  • High/Low temperature warning
  • Easy setup with memory function
  • Low battery warning
  • RF 433Mhz technology
  • One remote can control multiple plugs
  • Temperature calibration function

Let’s take a closer look at each of these features and see how they work.

Plug and play type, no installation required

One of the advantages of the Nashone Wireless Plug in Thermostat is that it is very easy to use. You don’t need to install or wire anything, just plug your heating or cooling appliance into the outlet unit, and plug the outlet unit into a wall socket. Then, use the remote control to set your desired temperature, and you are good to go. The thermostat will automatically turn on or off the appliance according to the current and target temperature. This is very convenient and hassle-free, especially if you don’t want to deal with complicated wiring or installation.

Support heating or cooling mode

The Nashone Wireless Plug in Thermostat can work with both heating and cooling appliances, such as space heaters, portable heaters, wall panel heaters, oil-filled radiators, electric fireplace heaters, evaporative coolers, swamp coolers, attic fans, window air conditioners, etc. You can choose between heating or cooling mode by pressing the +/ON or -/OFF button on the remote control. The thermostat will automatically adjust the temperature to keep it within the range you set. For example, if you set the target temperature to 25℃ in heating mode, the thermostat will turn on the heater when the current temperature is below 25℃, and turn it off when the current temperature is above 25℃. Similarly, if you set the target temperature to 25℃ in cooling mode, the thermostat will turn on the cooler when the current temperature is above 25℃, and turn it off when the current temperature is below 25℃. This way, you can enjoy a comfortable and consistent temperature in your room.

LCD display with green backlight

The remote control unit of the Nashone Wireless Plug in Thermostat has a LCD display with green backlight that shows the current and target temperature, as well as the working mode and status of the appliance. The display is clear and easy to read, even in the dark. You can also switch between ℃ and ℉ by pressing and holding the +/ON and -/OFF buttons together for 3 seconds. The display will also flash when the current temperature is too high or too low, or when the battery is low, to alert you of the situation.

High/Low temperature warning

The Nashone Wireless Plug in Thermostat has a high/low temperature warning function that can help you prevent overheating or freezing of your appliance or room. You can set the high and low temperature limits by pressing and holding the +/ON button for 3 seconds to enter the manual mode (Always ON), and then pressing the +/ON or -/OFF button to adjust the temperature. The default high temperature limit is 70℃ or 158℉, and the default low temperature limit is 0℃ or 32℉. You can change them according to your needs. When the current temperature reaches the high or low temperature limit, the thermostat will turn off the appliance and beep for 10 seconds, and the display will flash. This can help you avoid potential fire hazards or damage to your appliance or room.

Easy setup with memory function

The Nashone Wireless Plug in Thermostat is easy to set up and use. You just need to plug your appliance into the outlet unit, and plug the outlet unit into a wall socket. Then, use the remote control to set your desired temperature and mode. The thermostat will remember your settings even after a power outage or unplugging, so you don’t need to reset it every time. You can also pair one remote control with multiple outlet units, and control them separately or together. To pair a new outlet unit, you just need to press and hold the +/ON and -/OFF buttons on the outlet unit for 3 seconds, and then press any button on the remote control within 10 seconds. The outlet unit will beep twice to confirm the pairing. To unpair an outlet unit, you just need to repeat the same steps.

Low battery warning

The remote control unit of the Nashone Wireless Plug in Thermostat is powered by 2pcs*1.5V AAA batteries (not included). The batteries can last for about 3 months with normal use. When the battery is low, the display will show a low battery icon, and the remote control will beep for 10 seconds. You should replace the batteries as soon as possible to avoid losing the connection with the outlet unit. To replace the batteries, you just need to open the battery compartment on the back of the remote control, and insert the new batteries according to the polarity.

RF 433Mhz technology

The Nashone Wireless Plug in Thermostat uses RF 433Mhz technology to communicate between the remote control and the outlet unit. This technology is stable and reliable, and has a long transmission distance of up to 20 meters in open area. It also has a strong anti-interference ability, and can work well with other devices that use the same frequency. However, you should avoid placing the remote control or the outlet unit near metal objects, electronic devices, or other sources of interference, as they may affect the signal quality and performance.

Temperature calibration function

The Nashone Wireless Plug in Thermostat has a temperature calibration function that can help you adjust the accuracy of the temperature sensor. Sometimes, the temperature displayed on the remote control may differ from the actual temperature of the room, due to various factors such as the location of the remote control, the airflow of the appliance, the humidity of the air, etc. In this case, you can calibrate the temperature by pressing and holding the +/ON button for 6 seconds to enter the temperature calibration mode, and then pressing the +/ON or -/OFF button to adjust the temperature. The default temperature calibration value is 0℃ or 0℉, and you can change it within the range of -5℃~5℃ or -9℉~9℉. After you finish the calibration, press and hold the +/ON button again to save and exit.

Benefits of the Nashone Wireless Plug in Thermostat

The Nashone Wireless Plug in Thermostat can bring you many benefits, such as:

Related Articles

Back to top button